|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Used to shut-off the end of 1/4 in tubing. Removes easily.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal compression fitting tee for use with all 1/2 in drip tubing brands.
|
Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer.
|
Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing
|
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
|
Rain Bird Hose Adapter, 3/4 in Nominal, FHT x Tube Connection, 70 psi Pressure, Plastic, Black, Suitable for: 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double barbed design allows water pressure up to 50 psi.
|
Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 2 pieces of 1/2 in tubing.
|
Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively.
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
Connect 2 pieces of 1/2 in tubing in an "L" shape.
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 3 pieces of 1/2 in tubing in a "T" shape.
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing
|
Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing.
|
Compression tees made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.
|
Convert an 1800? spray head or a riser to a drip zone. This all-in-one unit includes a 200 mesh filter and 30 psi pressure regulator for proper operation of a drip irrigation system.
|
For outdoor faucet or hose. Includes backflow preventer, 150 mesh filter (pre-installed inside backflow preventer) and 25 psi regulator. Multi-function kit ensures proper operation of your drip irrigation system.
|
|
|
Visit Us