|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bits will work with many popular dovetailing jigs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. 14 degree angle.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
This new bit from Freud routs the edge flush and rounded in a single pass reducing time and aggravation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Up cut spiral is used for upward chip evacuation and the best finish on the bottom side of workpiece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides smooth, intricate dovetail joints. Compatible with many popular dovetailing jigs. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Provides smooth, intricate dovetail joints. Compatible with many popular dovetailing jigs. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creates key holes for hanging plaques and shelves. Large diameter bores holes to allow nail or screw heads to enter the slot while the smaller diameter allow room for the shank of the nail or screw. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held table mounted portable routers.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. No. 18-106: 3/16" large radius. No. 18-108: 1/4" large radius.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.
|
The 41 Series bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.
|
Versatile micro grain bits add attractive edging on new pieces and match many older molding cuts for remodeling work.
|
Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
For use in top surface chip-free routing where chip removal is not a problem. Ideal for through cutting of material with a table-mounted router or a pin router. Reduces chipping when working with single-sided veneers or laminated materials. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers, pin routers, hand-held and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on hand held and table mounted portable routers. Nos. 36-110 and 36-112, 1/2'' small diameter. 3/8" bearing diameter.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on handheld and table-mounted portable routers. No 36-110 and No 36-112, 1/2 in small diameter. 3/8 in Dia bearing.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Cove and bead bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Create smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a Craftsman uses a hand plane.
|
The top mounted bearings on these bits make them ideal for lettering and other template work and lettering. Use on hand-held and table-mounted portable routers, cuts all composition materials, plywoods, hardwoods and softwoods.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roman ogee bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on hand held and table mounted portable routers. Nos. 36-110 and 36-112, 1/2'' small diameter. 3/8" bearing diameter.
|
|
|
Visit Us