|
|
|
|
|
|
|
|
|
|
|
|
|
|
All Kreg drivers feature a solid 1-piece construction, magnetic tip and Kreg Quick-Change chuck compatibility for fast and easy bit changes. This combo includes one 3 in (76 mm) square driver and one 6 in (152 mm) square driver. The 6 in version offers the most flexibility and ease-of use for your projects. The 3 in version is handy when you are working in tight spots where the 6 in driver can't reach.
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The #888 dowel centers, eight assorted are ideal for locating, transferring and matching dowel holes.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
The #S838 drill stops, six assorted prevent excessive penetration of twist and brad point drill bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 in driver with deep #3 square drive. Optimized for use with Kreg Jig HD screws. All of our drivers feature a solid, one-piece construction, magnetic tip and Kreg quick-change chuck compatibility for fast and easy bit changes.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Use for joints where strength is critical. Biscuits swell in joints for maximum strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our No 20 plate joiner biscuits are made of the best wood laminate for stability, strength and fit. They are designed to fit slots cut by all standard plate jointers. Biscuits swell when used with water-based glues to lock and strengthen the joint.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Use to hide or decoratively accent exposed pocket-holes. Works with materials from 1/2 to 1-1/2 in thick.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
For use with the Kreg Jig HD and 1-1/2 in and larger stock. Large 2-1/2 in long #14 hardened steel screws provide ideal shear resistance as well as a Protec-Kote finish with 3 anti-corrosion layers for long term moisture resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DW6825 tube of 100 No. 20 size biscuits are manufactured to the highest industry standards with 100% compressed beech to deliver great joint strength.
|
|
Features 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
Use to hide or decoratively accent exposed pocket-holes. Works with materials from 1/2 to 1-1/2 in thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to hide or decoratively accent exposed pocket-holes. Works with materials from 1/2 to 1-1/2 in thick.
|
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Add a second bit to your Kreg? 300 Series pocket-hole jig or update any Kreg Jig to make building wood projects with boards and plywood even easier. The Kreg? easy-set pocket-hole drill bit with step collar and gauge/wrench is the same stepped bit that comes with 300 Series Kreg pocket hole jigs. This drill bit works with materials from 1/2 in to 1-1/2 in thick and features engraved markings for 1/2 in, 3/4 in, 1-1/2 in, along with the matching easy-set stop collar. The material thickness gauge allows you to easily determine material thickness from 1/2 in to 1-1/2 in easily, too. A 1/4 in hex-shank fits all standard quick-change chucks. Compatible with all Kreg pocket-hole jigs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kreg? Jig? Mini is good for very specific applications where the smallest jig possible is required. The simplistic design includes the hardened-steel drill guide of the other jigs but does not include a reference fence, so material thickness adjustments must be made manually. This fenceless design allows you to make precise angle and stock depth adjustments as needed, making the Mini the most positionable Kreg? Jig? available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create compact pocket holes with 500-series and 700-series pocket hole jigs. The easy-set Micro-Pocket? drill bit with stop collar and material thickness gauge is designed for use with the Micro-Pocket? drill guide kit (KPHA530 and KPHA730) to create 25% smaller pocket holes using 500-series and 700-series pocket hole jigs.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kreg pocket-hole screw starter kit provides a right-sized, right-priced assortment of the Kreg screws for Kreg Joinery projects. The pocket-hole screw starter kit includes the most-commonly used Kreg screws, from 25 mm pan-head screws for building with 13 mm thick material, through 64 mm Blue-Kote??? screws for building bigger projects outdoors, all housed in a durable, divided case.
|
XL Pocket-Hole Screw are optimized for use with the Kreg Pocket-Hole Jig? XL, the Kreg Jig HD and 1 1/2 ft and larger stock. These large 2 1/2 ft - long #14 hardened-steel screws provide incredible shear resistance, and have a Protec-Kote? finish with three anti corrosion layers for long term moisture resistance. #3 square driver.
|
Maxi-Loc screws are the Kreg Screw of choice for the majority of applications. These screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. Blue-Kote finished screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Rust-resistant screws, works with pressure treated material. Recommended for use with softwoods, as well as for sheet goods such as plywood and MDF that are soft and not very dense. The deep aggressive threads bite into soft fibers to ensure solid holding power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kreg? pocket-hole jig 310 makes it easier than ever to build wood projects whether you're building your first DIY projector you've been working with wood for years. The pocket-hole jig 310 uses a simple, easy-to-understand setup process that gives you the versatility you need to build with boards and plywood of any thickness between 1/2 in and 1-1/2 in. The 310 features a hardened-steel drill guide and a convenient material-thickness stop. The included material thickness gauge and easy-set drill bit make setup simple and the anti-slip base holds the jig precisely in position while you drill perfectly positioned pocket holes every time. Durable construction and a lifetime drill-guide warranty ensure that the Kreg pocket-hole jig 310 will deliver the years of project-building and home-repair satisfaction and value you expect from the #1 pocket-hole brand Kreg?.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? stainless screws are specially designed for maritime applications, excessive exposure to water and other exceedingly corrosive environments, such as ACQ-treated lumber. If you're looking for the excellent in rust-prevention, this is your solution.
|
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? stainless screws are specially designed for maritime applications, excessive exposure to water and other exceedingly corrosive environments, such as ACQ-treated lumber. If you're looking for the excellent in rust-prevention, this is your solution.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
For use with the Kreg Jig HD and 1-1/2 in and larger stock. Large 2-1/2 in long #14 hardened steel screws provide ideal shear resistance as well as a Protec-Kote finish with 3 anti-corrosion layers for long term moisture resistance.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Turn any drill into a 90 deg driver with the Kreg? 90 deg pocket hole driver. This compact drill attachment allows you to drive screws in places you couldn't normally reach with your drill. The included 3 in square-drive bit has a magnetic tip that locks into the head of a pocket hole screw and won't slip out so you can drive screws with confidence, no matter where they are. This attachment works with all hex shank bits, making it great for more than just pocket hole screws. With an ergonomic design, the 90 deg pocket hole driver is easy-to hold in place with one hand while you control the drill with the other. It's also Impact rated for use with an impact driver. Whenever you need to drive screws in tight spaces, count on the 90 deg pocket hole driver to get the job done.
|
Features 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
By assuring alignment of dowel holes and pins, the #840 pro doweling kit helps create professional-quality edge-to-edge, right-angle and edge-to-surface joints that can be press-fit or glued.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The drawer slide jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated and undermount slides for ideal positioning every time.The drawer slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet and to support the drawers as you attach the slides to them. The jig is simple to use and it ensures that every drawer fits right and operates smoothly.
|
Get an extra helping hand for installing cabinet doors with the Kreg? cabinet door mounting jig. It makes the job of installing cabinet doors a breeze whether you're working with face frames or frameless cabinets. It works with both left-hand and right-hand doors. The jig features a support arm that helps you hold the door with one hand, while your other hand is free to mount the hinges to the cabinet. The cabinet door mounting jig also allows you to position your cabinet doors precisely. Adjust the support arm to one of the nine different positions to get your doors placed exactly where you want them. There's one setting for inset doors and eight more at 1/4 in increments, so you can support doors that overlay the cabinet face up to 2 in. The cabinet door mounting jig comes with two micro-adjustment shims for even more fine-tuning. Use one shim to move the door up by 1/16 or 1/8 in or combine both shims for 3/16 in of adjustability.
|
Includes 150 count of: SPS-F1 (1 in, fine), SPS-C1 (1 in, coarse), SML-F125 (1-1/4 in, fine) and SML-C125 (1-1/4 in, coarse) and 75 count of SML-C250B(2-1/2 in, coarse).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? stainless screws are specially designed for maritime applications, excessive exposure to water and other exceedingly corrosive environments, such as ACQ-treated lumber. If you're looking for the excellent in rust-prevention, this is your solution.
|
With the Kreg Jig? R3, you can build bookcases, shelves and storage projects for your home. It's also great for creating custom built-ins and countless other home improvement projects. Plus, the Kreg Jig? R3 can be used portably to make lasting repairs around your home.
|
Jig allows you to create three popular types of pocket hole joints with accuracy and relative ease. Made of heavy-duty aluminum, it can be mounted to a bench for stationary use and includes a clamping system for portable use. Used in applications such as building cabinets, furniture or other high precision woodworking endeavor. Includes one pocket hole jig with clamps, 3/8 in step drill bit, three step drill stops such as 1/4, 5/16, 3/8 in, hex wrench, 6 in steel square drive bit and square drive screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kreg? cabinet hardware jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for ideal knob and pull positioning every time. Ideal for new construction and for refreshing entire rooms.
|
The concealed hinge jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the concealed hinge jig works with an ordinary drill and the included carbide tipped bit. The concealed hinge jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called "Euro hinges") using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset and drills to the ideal depth every time thanks to a depth stop collar. The jig is simple to use and it ensures that you can mount cabinet doors that fit great and work properly.
|
The Kreg? pocket-hole jig 320 makes it easier than ever to build wood projects whether you're building your first DIY projector you've been working with wood for years. The pocket-hole jig 320 uses a simple, easy-to-understand setup process that gives you the versatility you need to build with boards and plywood of any thickness between 1/2 in and 1-1/2 in. The 320 features two drill guides, a removable spacer and convenient material-thickness stops. The included material thickness gauge and easy-set drill bit make setup simple, while the convenient clamp adapter and anti-slip base hold the jig precisely in position while you drill perfectly positioned pocket holes every time. The jig and its included components store in a durable, compact case that even has space to store Kreg Pocket-Hole Screws with 40 sample screws included. Durable construction and hardened-steel guides with a lifetime warranty ensure that the Kreg pocket-hole jig 320 will deliver the years of project-building and home-repair satisfaction and value you expect from the #1 pocket-hole brand Kreg?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This kit contains four of our most popular weather-resistant screws for Kreg Joinery in a durable, easy-to-carry case. It's a great starter kit for anyone new to Kreg Joinery, who wants to build outdoor projects.
|
Like our other micro drill guides and accessories, the Kreg? pocket hole jig micro creates a 33% smaller pocket hole. These smaller pocket holes are ideal for working with thin and narrow stock when building drawer boxes, working on smaller craft projects, or for making repairs. This new stand-alone jig is easy to use and like our other 300 series jigs is incredibly versatile. With a twist-apart design for thickness settings of 1/2 in and 3/4 in, easy-set drill bit and hardened steel drill guides, this is the ideal solution when working with thin and narrow stock. The included material thickness gauge and easy-set drill bit make setup simple and the GripMaxx? anti-slip base holds the jig precisely in position while you drill perfectly positioned pocket holes every time. Durable construction and a lifetime drill-guide warranty ensure that the Kreg? pocket hole jig micro will deliver the years of project-building and home-repair satisfaction you expect from the #1 pocket hole brand Kreg. The Kreg? pocket hole jig micro is excellent suited for use with our Kreg? pan-head zinc pocket hole screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
The custom plug cutting bit works with the custom pocket-hole plug cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill and fits into the hardened-steel drill guide in the plug cutter to produce plugs in the correct diameter to fit standard-size Kreg Jig? pocket holes.
|
The custom plug cutting bit works with the custom pocket-hole plug cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill and fits into the hardened-steel drill guide in the plug cutter to produce plugs in the correct diameter to fit Micro-Pocket? Kreg Jig? pocket holes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The custom plug cutting bit works with the custom pocket-hole plug cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill and fits into the hardened-steel drill guide in the plug cutter to produce plugs in the correct diameter to fit Kreg Jig? HD (Heavy-Duty) pocket holes.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT Small Diameter Construction? saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
|
|
The ultimate bench top set up for Kreg? pocket hole jig 520PRO and 720. Expand the capability of your Kreg? pocket hole jig 520PRO with the docking station - complete with material support wings, added storage and a pocket hole jig clamp to secure the jig to your workspace. All these together give you a premium benchtop joining station for your pocket hole jig 520PRO. Material support wings make it easy to work with long boards and plywood. Just disconnect them for repositionable support for material of any length. You can also keep them attached to the base and fold them up when not in use. Plus, keep Kreg? pocket hole screws, drill bits, and more inside the material support wing storage compartments. An adjustable stop attaches to the material support wings so you can set up for repeatable pocket hole positioning. Use the pocket hole jig clamp to secure the dock and your jig to your workstation. The docking station also works with the pocket hole jig 720.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Build pocket hole projects anytime, anywhere. The pocket hole jig 520PRO is the most versatile jig yet from Kreg?. It's the essential jig for project builders who need an easy-to-use joinery solution wherever you work - in the backyard on the driveway or even in a friend's garage. This jig sets the standard for versatility in pocket hole joinery. It's loaded with features, like the VersaGrip? 360 deg rotating handle that helps the 520PRO adapt easily to nearly any pocket hole project. VersaGrip? also includes built-in clamping - just squeeze the handle until your material is clamped securely. With this flexible design, you'll never have to worry about struggling with large boards or sheets to add pocket holes in the right places. Instead, the 520PRO works in almost any orientation, so you can easily move the jig to any position, clamp it and drill perfect pocket holes. Preparing to drill pocket holes is easy. Preset material thickness settings on the drill guide block makes setup fast for 1/2 in, 3/4 in, and 1-1/2 in material. Plus the adjustable stop offers repeatability when you need to drill multiple pocket holes in pieces of similar thickness. A sturdy steel reinforced spine and hardened steel drill guides ensure that the 520PRO will deliver years of quality project building performance.
|
The Kreg? Jig? K4 is the ideal choice for do-it-yourselfers and anyone new to pocket-hole joinery. The 3-hole drill guide lets you make ideally placed pocket holes in a wide variety of material widths and thicknesses from 1/2 to 11/2 in, 1/8 in increments. Every Kreg? Drill Guide features a hardened-steel core that carries a lifetime assurance. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out and a clean, pluggable pocket hole. The Kreg? Jig? K4's rear-mounted clamp design has been around since the first Kreg? Jig?. Its proven design offers incredible rigidity and uncompromising workpiece holding strength. Adjustments are as easy as releasing the locknut and rotating to the correct setting.
|
Build pocket hole projects faster than ever. The pocket hole jig 720 is the most advanced jig yet from Kreg? with that features make project building incredibly efficient. It's the premium choice for project builders who want to build smarter and faster than ever. This jig makes quick work of creating pocket hole joints. Features like Automaxx? one-motion clamping help you save time and effort by simultaneously clamping your workpiece and automatically adjusting to the exact thickness of your material (from 1/2 to 1-1/2 in). GripMaxx? anti-slip holds the project piece secure so you never have to worry about it shifting while you drill pocket holes. A dust collection attachment connects to your shop vacuum to keep your workspace dust-free. The jig has a sturdy, steel reinforced spine, plus hardened steel drill guides with a lifetime warranty, to ensure years of high-quality performance. The on-board tool storage keeps accessories like the hex wrench and drill bits close at hand. With the pocket hole jig 720, you get 60 Kreg? pocket hole screws and a free project plan so you can start building right away. The pocket hole jig 720 can even be transformed into the ultimate joining setup by adding the pocket hole jig clamp or docking station, sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Build pocket hole projects faster than ever with the ultimate jig. The pocket hole jig 720PRO is the ultimate joining set up from Kreg? with features that make project building incredibly efficient. It's the premium choice for project builders who want a full suite of 700-series tools and accessories that make the 720PRO a fast, easy-to-use jig with enhanced material support, storage and stability. This jig makes quick work of creating pocket hole joints. Features like Automaxx? one-motion clamping help you save time and effort - by simultaneously clamping your workpiece and automatically adjusting to the exact thickness of your material (from 1/2 to 1-1/2 in). GripMaxx? anti-slip holds the project piece secure so you never have to worry about shifting while you drill pocket holes. Included with the 720PRO are the Kreg? docking station material support wings with a repeatable stop, as well as a pocket hole jig clamp. Use the pocket hole jig clamp to secure the jig to your workstation, while material support wings add support when drilling into large pieces. Best of all, the wings fold up and stow away easily when you're done. These premium additions transform your jig into the ultimate pocket hole workstation when you need more storage, more material support, and more stability. A dust collection attachment connects to your shop vacuum to keep your workspace dust-free. The jig has a sturdy, steel reinforced spine, plus hardened steel drill guides with a lifetime warranty, to ensure years of high-quality performance. The on-board tool storage keeps accessories like the material thickness gauge and drill bits close at hand. With the pocket hole jig 720PRO, you get the Kreg? docking station material support wings with a repeatable stop, a pocket hole jig clamp, 160 Kreg? pocket hole screws, and a free project plan so you can start building right away.
|
Built with professionals and hobbyists in mind, the Foreman pocket-hole machine is packed with features that will have you building with twice the speed and half the effort of a standard pocket-hole jig. The Foreman DB210 offers all of the same features and capabilities of our professional-grade machines in a machine that's versatile, portable and extremely affordable. Create pocket holes with amazing speed and accuracy time and time again. Simply pull the large control handle to start the powerful 110 V motor, clamp your workpiece securely in place and raise the drill bit through the table. This simple operation drills a precisely-placed pocket hole at the ideal depth in materials from 1/2 to 11/2 in thick. To ensure ideal pocket hole placement, the Foreman DB210 features a tool-free adjustable fence that positions your workpiece for precise pocket depth and a pair of adjustable, spring-loaded stops that provide repeatable accuracy. Plus, clear markings in the table make it easy to position the fence for your material thickness. The Foreman comes with a standard 3/8 in Kreg? stepped drill bit to get you started for materials from 1/2 to 11/2 in thick. It's also compatible with the Kreg? Micro-Pocket? bit to create more compact pocket holes in thinner stock and the Kreg? heavy-duty bit for creating strong joints in 11/2 in and thicker stock. The Foreman's lightweight yet durable construction allows for hassle-free transportation ideal for use in your shop, around your home and on-the-go. Even with this portability, the Foreman still features a large table with ample workspace. You'll love the built-in storage tray the ideal place to store extra bits and accessories, keeping them close-at-hand. The Foreman also includes a dust collection attachment to keep your work area clean.
|
|
|
Visit Us
