|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
|
Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.
|
Dremel Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dremel Abrasive Buff, Aluminum Oxide/Silicone Carbide, 1 in Dia, Suitable for: Dremel Rotary Tools, Includes: (1) Coarse 180 Grit and (1) Medium 280 Grit
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
To be used with all cutting wheels, sanding discs and polishing wheels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
One pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And Dremel? contour sander 6000 (Type 1 and 2).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
Dremel? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel? chain saw sharpening attachment.
|
Dremel? chain saw sharpening stone is for use with Dremel? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision ground abrasive stone for quick, easy sharpening of chain saw blades.
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
|
The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.
|
Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Wire Brush Set, 1 in Diameter, 1/8 in Arbor/Shank, Steel Bristle, 15,000 rpm Speed, Suitable for: 1/8 in Shank Dremel, Moto-Tool, Craftsman, Wizard, Black & Decker Tools, Includes: (2) Wire Brushes
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
The Dremel EX lock mandrel makes accessory changes easy as pull twist release, the one-piece mandrel design simplifies the process of changing sanding discs and makes it easy to sand flat surfaces and edges, for use with the EZ402 EZ lock mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Cut-Off Wheel, Aluminum Oxide Abrasive, 1-1/4 in Arbor, 30,000 rpm Speed, Applicable Materials: Metal, Includes: (3) Cut-Off Wheels
|
Forney Buffing Pad with Shaft, Satin, 3/4 in Diameter, 30,000 rpm Speed, Applicable Materials: Gold, Silver
|
Replaceable bit for the 290 Dremel? (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots.
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel.
|
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Easy-to-use and less messy, the 520-02 is ideal for high-luster polishing. Pack includes two polishing wheel accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Cut-Off Wheel, Fiberglass Backing, 40,000 rpm Speed, 1-1/2 in Diameter, 1/32 in Thickness, Applicable Materials: Metal
|
Forney Sanding Drum Kit, Rubber Backing, Brown, Medium Grit Grade, 1/2 in Diameter Drum, 1/2 in Drum Length, Includes: Mounted Rubber Drum with 1/8 in Shaft, Fine, Medium, Coarse Grit Sanding Sleeves
|
Includes 1/2 in x 1/2 in cylinder, 1/4 in x 1/2 in ball end and 1/8 in tree point mounted points with 1/8 in shaft. For cutting soft metals, wood, plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
Wheel tip for general-purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
|
Forney Cup Brush Set, 3/8 in Diameter, Suitable for: Dremel, Moto-Tool, Craftsman, Wizard, Black & Decker Rotary Tools
|
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel? 335-01 plunge router attachment, Dremel? 231 shaper/router table and also older router attachments #230 and #330. Made of high-speed steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
|
Dremel Cutter, 3/32 in Dia, Shank Diameter: 1 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel
|
Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a powerful high-speed cutter. Create stylish designs on wood, fiberglass, ceramics, jewelry, soft metals and more. Our powerful, simple-to-use engraving cutters make it easy to express your creativity. Two cutters per pack.
|
Forney Cut-Off Wheel Kit, Fiberglass Backing, 1/8 in Arbor, 30,000 rpm Speed, 1-1/4 in Diameter, Applicable Materials: Metal, Includes: (1) 1/8 in Mandrel
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.
|
Improve the grip for bits in our rotary tool line with a genuine Dremel? collet set. With the 480, 481, 482, 483 collets, plus a quick-change collet nut, you can easily use a wide range of bits.
|
Dremel Cutter, 1/4 in Dia, Shank Diameter: 1/8 in, 25,000 to 30,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The power cleaner accessory variety pack is a combination of 3 cleaning pads good suited to clean a multitude of materials from ceramic and porcelain to glass and stainless steel. They can be used multiple times and washed with water or cleaning detergents. The integrated hook and loop system allows their easy and fast change on the Dremel? versa cordless power cleaner.
|
Forney Wheel Kit, Diamond, Specifications: 30000 rpm, Includes: (2) Forney 60249 3/4 in Diamond Wheels and 1/8 in Mandrel
|
Forney Cut-Off Wheel Kit, Fiberglass Backing, 1/8 in Arbor, 40,000 rpm Speed, 1-1/2 in Diameter, Applicable Materials: Metal, Includes: (1) 1/8 in Mandrel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Mini Rotary Rasp Set, 30,000 rpm Speed, Applicable Materials: Metal, Plastic, Wood, Includes: (1) Cone Shaped Rasps, (1) Cylinder Shaped Rasps
|
The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
|
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dremel? EZ Lock makes accessory changes easy as pull, twist, release. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories.
|
The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic.
|
Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dremel? chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes.
|
Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling creative, you can even use the tool to create a decorative design in your tiles. Just use the tile cutting bit to carve your design, like a sailboat, then fill the grooves with colored grout.
|
Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Use with either EZ402 (SKU #482.4447).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Saw Blade Kit, Mini, Specifications: 30,000 rpm Revolutions/min, 1/8 in Shank, 3 Piece
|
The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.
|
The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.
|
|
|
Visit Us
