Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > LUBRICANTS & FLUIDS
Choose a sub category:
A/C COOLANT STARTER FLUID MOTOR OIL
MOTOR OIL ADDITIVES GEAR OILS TRANSMISSION FLUIDS
HYDRAULIC OIL OIL/FLUID CLEAN-UP GREASE
GREASE FITTINGS GREASE GUNS/ACCESSORIES DEGREASERS
CARBURETOR & PARTS CLEANERS OIL CANS BRAKE FLUIDS
POWER STEERING FLUIDS FUEL ADDITIVES WINDSHIELD FLUIDS/TREATMENTS
ICE REMOVAL SPECIALTY LUBRICANTS FUNNELS/MEASURES
DRIP PANS / DRAIN PANS
Sort By:
Page of 5
Rhinogear 5007 Small Funnel 4-3/4 in H x 4.38 in W x 3.88 in D STP 00203 Brake Fluid STP 78572 All Season Water Remover
Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with multiple substances such as oil, radiator fluid or fuel additives. STP? heavy-duty brake fluid DOT 3 is specially formulated to coax optimum performance out of disc or drum brake systems in today's cars and trucks. This concentrated fuel treatment helps maintain optimum performance all year round. It works to fight rust and corrosion while removing condensation in warm weather and helps prevent fuel line freeze.
STP 78571 Fuel Injector and Carburetor Treatment Heel 28201 Gas Line Anti-Freeze Prestone AS-400P Brake Fluid
Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. STP? fuel injector and carburetor treatment is specially formulated to maintain clean performance of fuel injectors and carburetors by helping to prevent the accumulation of deposits. It's made with jet fuel, a high-quality carrier of active ingredients. Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gal. Prestone? DOT 3 synthetic hi-temp brake fluid is designed to provide an extra margin of boiling point protection. The mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor. This delivers braking power when needed by avoiding a spongy pedal. Both wet and dry boiling points exceed the minimum government standards. A comprehensive inhibitor package protects vital brake system metals.
Hopkins 5034 Super Funnel STP 66046 Power Steering and Stop Leak Rain-X 800002242/RX11112 Original Glass Treatment
May be used with multiple substances such as oil, radiator fluid or fuel additives. One-piece tapered, tough, high-density polyethylene for hard-to-reach spots. STP? power steering fluid and stop leak is specially formulated for vehicles over 75,000 miles to stop or reduce fluid loss caused by seals that leak due to wear or shrinkage (not for use with broken or scored seals). This treatment helps stop most wear and shrinkage levels. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet and snow, frost, salt, mud, bugs and grime.
Blaster PB50 Lubricant STP 66079/ST-1014 Performance Oil Treatment Permatex 80345 Grease
B'laster Multi-purpose lubricant is a high-performance formula designed to lubricate moving parts in and around the house such as window tracks, hinges, chains, glides and gears. Formulated with Teflon? fluoropolymer to help reduce friction and wear, enhance performance and protect surfaces. It outperforms leading competitors and prevents rust and further corrosion on car parts, fishing reels and tackle, all tools, firearms, sports equipment, marine applications and more. This high-viscosity formula is specially formulated to help fight metal-to-metal friction and protect your engine by providing a thicker cushion between moving engine parts. Permatex white lithium grease is a liquid aerosol lubricating paste designed to reduce friction between load bearing moving metal surfaces and/or the combination of metal and plastic surfaces. The product also protects metal surfaces from corrosion.
Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler Gumout 800001370 Gas Treatment STP 78573 Gas Treatment
For hand-operated lube equipment only. 4500 psi recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8 in NPT threads. Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gal of gasoline every fill up. STP? gas treatment improves the quality of gas by adding powerful cleaning agents that help fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system that can reduce performance. Also engineered to remove water, which can lead to fuel line freeze. This product is made with jet fuel, a high-quality carrier of active ingredients.
Solder Seal Gunk M516 Anti-Freeze Windshield Washer Fluid Bell V500 Lock Lubricant Thaw De-Icer 3-in-One 10035 Oil
Concentrated formula designed to protect windshield washer systems from damage caused by temperatures as low as 25 deg F. Great for all season use when diluted as directed. Makes 8 gal. SubZero? and Victor? Lock De-Icer? and Lubricant thaws frozen locks while lubricating the lock cylinder preventing damage to the lock mechanism. Works great on car doors, ski racks, luggage, padlocks, home and garage doors, mailboxes and more. Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors.
Lubrimatic 05-037 Gun Injector Needle Nozzle WD-40 490002 Lubricant Lubrimatic 05-031 Standard Jaw Curved Grease Gun Coupler
Lubricates in very tight places like universal joints and sealed bearings. Stainless steel 18 ga x 1-1/2 in long needle. Equipped with standard grease fitting and protective plastic holder. For hand-operated grease guns only. WD-40? Multi-use product lubricates moving parts such as hinges, wheels, rollers, chains and gears. It protects against rust and corrosion on items like tools and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools. For hand-operated lube equipment only. 4500 psi recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8 in NPT threads.
CLEANER CHOKE/CARB JET SPRAY  Honeywell AS-262 Power Steering Fluid STP 78575 Super Fuel Injector Cleaner
The carburetors and choke valves in small engines are especially prone to gum, varnish and dirt build-up because of less frequent use. Gumout? small engine carb and choke cleaner quickly removes these deposits from the inside and outside of the carburetor to improve engine performance and fuel economy. One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC and most foreign cars. STP? super concentrated fuel injector cleaner contains concentrated detergents that help dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Without cleaning, deposits can lead to hard starts, lost acceleration and rough idling. This product is made with jet fuel, a high-quality carrier of active ingredients.
Prestone AS-242 Windshield De-icer Permatex 81343 Anti-Seize Lubricant Hopkins 5068 Funnel Set
LUBE ANTISEIZE 1OZ
Our Price: $4.59
Prevents refreezing and smearing. A concentrated formula with a high powered propellant for windows, locks and wipers. A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 to 1,600 degrees Fahrenheit. Salt, corrosion and moisture resistant for marine use. For easy removal of spark plugs, cylinder head and exhaust head bolts. Meets Mil Spec #907E, Level 3 NFPA Fire Code. Tube, carded. Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2 pt, charcoal 1 pt and black 2 qt.
Gumout 5072866 Instant Starting Fluid Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak Radiator Specialty M2312 Gas Treatment
Engines need the right conditions to perform properly. If temperatures drop too low, gasoline can have problems evaporating, making it harder to burn. Extreme humidity can also have an effect on fuel's performance. Gumout? starting fluid helps engines start in all types of extreme weather, while conditioning fuel and engine parts to prevent friction and corrosion. Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle. Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. One plastic bottle treats one tank, use in every tank for maintenance.
3-in-One 10045 Motor Oil STP 78595 High Mileage Oil Treatment Gunk Solder Seal Transeal M1512 Strong Transmission Sealer
3-IN-ONE? motor oil created a special blend of high grade oils that's equivalent to SAE 20. The motor oil formulation is ideal for lubricating the moving parts of electrical motors. This high-viscosity formula is specially designed to help fight metal-to-metal friction in cars and light trucks with over 12,00,00 km by providing a thick protective cushion between moving engine parts. Automatic transmission sealer, stops leaks fast, compatible with most ATF, conditions seals, shift improver. In a plastic bottle.
Plews 11-855 Standard Grease Fitting Assortment Gumout 800002231/7559 Carb and Choke Cleaner Gumout 800001706 Octane Booster
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes four straight, two 45 deg and two 90 deg fittings. Cleans the inside and outside of carburetor right down to the bright bare metal. Frees sticking automatic chokes, manifold heat controls and cleans the PVC valve and all carburetor linkage. Removes gum, varnish and dirt instantly. Aerosol can. Helps stop knocks and pings, boost octane rating. Use with up to 15 gal of gasoline every fill up.
CLEANER INJECT FUEL TRTMT 12OZ Radiator Specialty M4912 Fuel Injector Cleaner Rain-X Anti-Fog AF21106D/AF21112 Glass Treatment
Specially formulated with H.E.S.T and detergents focused on cleaning fuel injectors. Dissolves gum, varnish and other deposits, disperses moisture and thoroughly clean the fuel injectors fuel pump and fuel lines. Offers faster starts, smoother idling, increased performance and improved fuel economy. Catalytic converter and oxygen sensor-safe. Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle. Wipe-on formula for auto and home. Ends fogging, misting and steaming of interior glass, mirrors and plastics.
3-IN-ONE 120008 All-Temp Silicone 3-IN-ONE 120015 Fast Acting Penetrant 3-IN-ONE 100703 Oil With Telescoping Spout
Lubricates, waterproofs and protects with no messy residue in temperatures between -100 to 500 deg F. Safely works on plastic, metal and rubber. Marksman spout for easy precision application. 50 state VOC compliant. Marksman spout for easy precision application. Fast acting. Quickly breaks bonds that hold rusted parts together. Prevents rust. 3-IN-ONE? Multi-Purpose Oil with the Marksman Spout comes in handy when precise control is required. With the same multi-purpose oil as the famous 3-IN-ONE? formula, the ergonomically shaped bottle is easy to use and fit into toolboxes and toolbelts. Its on-and-off twist tip will help you avoid unwanted spilling and leaking and its clear product fill indicator will tell you when you're running low. Now, you can clean, lubricate and protect your tools and equipment easier and better than ever.
Permatex 77134 Anti-Seize Lubricant Lubrimatic 11-301 Straight Grease Fitting Gumout 800001363 Fuel Injector Cleaner
Permatex? Nickel anti-seize lubricant is a high-temperature, high-quality, heavy-duty lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. It contains tenacious metals, oils and graphite materials that cannot be burned away or removed by slow moving parts. It is recommended for use where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Designed for high mileage vehicles. Helps clean fuel injectors, intake valves and prevent future deposit buildup. Use every 3000 miles. Treats up to 21 gal.
Radiator Specialty M5012 Lead Substitute Gas Treatment ADAPTER HOSE RECHRG FOR R134-A Lubrimatic 11-101 Standard Straight Short Grease Fitting
Replaces lead protection, contains valve seat anti-wear additive, intended for off-road use. 1 bottle treats up to 20 gal. In a plastic bottle. IDQ Rechargeable Hose Adapter, Suitable for: R-134a Self-Sealing Cans Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking.
Lubrimatic 11-105 Standard Grease Fitting Gumout 800001371 Fuel Injector Cleaner Radiator Specialty M5112 Gasoline Octane Booster
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Helps clean fuel injectors, prevent future deposit build up and improve fuel economy and acceleration. Treats 21 gal of fuel. Restores engine performance. Contains additives that remove water and fight rust. Reduces emissions, knock, ping and hesitation. Cleans injectors, intake valve and combustion chamber deposits. Removes deposits which tend to cause engine octane requirements to rise. After use of product, many engines will accept regular unleaded gasoline without knocking, pinging and after-run. In a plastic bottle.
CLEANER FUEL SYSTEM 15FLOZ    Solder Seal Gunk M3815 Standard Thrust Starting Fluid Permatex 81150 Tune-Up Dielectric Grease
Quickly disperses moisture and dissolves gum, varnish and other fuel residues from the entire fuel system, fuel tank, fuel lines, fuel injectors, valves, rings and pistons with H.E.S.T. Regular use ensures higher compression, fewer repairs, lower operating costs and increased spark plug and injector life. Available in both consumer and commercial sizes. Catalytic converter and oxygen sensor-safe. To promote quick starting of gasoline and diesel engines under extreme cold conditions down to -65 deg F. Saves battery and ignition during cold weather. Contains upper cylinder lubricant and corrosion inhibitors. Spray fluid directly into air cleaner of air intake before starting engine. Avoid spraying for over 5 secs per attempt. If engine still refuses to start repeat procedure for up to 3 times. Aerosol can. Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems. Suggested applications: marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.
Lubrimatic 11-957 Assortment Grease Fitting Kit Lubrimatic 10-200 Economy Flexible Grease Gun Hose CLEANER BRK PRT NON-CHLOR 14OZ
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes four straight, two 45 deg and two 90 deg fittings. 6 mm-1 thread. For use on hand operated grease guns only. Steel 1/8 in NPT male fittings on each end. Economy hoses has a 3000 psi working pressure and standard-duty hoses has a 5000 psi working pressure. Cleans brake fluid, grease, oil and other contaminants from all brake parts fast like chlorinated brake cleaners but without chlorinated solvents. Available in a variety of sizes to accommodate any job. Dries quickly and leaves no residue.
CLEANER CARB/CHK/THRTLBDY 16OZ Solder Seal Gunk Steer Seal M1712 Power Steering Sealer Solder Seal Gunk DE1 Windshield De-Icer
Quickly dissolves gum, varnish, fuel residues and other deposits from carburetor, PCV valve, automatic choke, carburetor linkage, throttle body and distributor shaft with H.E.S.T for maximum performance and fuel economy. Improves drivability by removing deposits that cause rough idle, stalling and loss of acceleration. Available in a variety of sizes to accommodate any job. Catalytic converter and oxygen sensor-safe. Steer Seal? Power steering sealer stops power steering system leaks due to drying, hardening or shrinking of rubber seals. Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation.
3-in-One 10038 Oil Blaster 16-LG Grease Rain?X 800002243/RX11212 Original Glass Treatment
3-IN-ONE? Versatile multi-purpose drip oil has been a trusted tool used by professional tradesmen and Do-It-Yourselfers to lubricate moving parts, penetrate rust, clean and protect tools and much more. Its precise, easy-to-use drip spout enables precise application, with no overspray or splatter and its updated packaging has a fill level indicator strip that shows you when you're running low. 3-IN-ONE? oil can be used to lubricate tools, hinges, nuts and bolts, bicycles, wheels, fans and many other moving parts. Blaster white lithium grease is low odor, clean, white grease that lubricates by creating a protective barrier. It protects against moisture and oxidation and is safe for a wide range of applications. It provides low friction lubrication and heavy-duty protection. Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet and snow, frost, salt, mud, bugs and grime.
Blaster 16TDL Dry Lubricant WD-40 490026 Smart Straw Lubricant Blaster 16-SL Silicone Lubricant
B'laster Dry lube is formulated with Teflon? fluoropolymer, which helps reduce friction and wear, protect surfaces and enhance performance. Use it on locks and catches, hinges, cables, window and door tracks, rope and conveyor belts. It provides excellent lubrication and is safe for use on most plastics. Features a permanently attached straw that flips up for a precision stream and down for regular spray action. Displaces moisture, non-conductor that can be used to dry-out electrical and electronic equipment. Penetrates, loosens, and frees stuck, frozen, or rusted parts. Lubricates and protects metal against moisture and corrosive elements. Removes grease, grime, tar, gum, crayon, water deposits, and more. Dissolves adhesives for easy removal. Silicone-free for no messy, gummy residue. B'laster Silicone lubricant contains a higher concentration of silicone than competitor brands, which provides longer-lasting lubrication. Formulated with Teflon? fluoropolymer to enhance performance. Its clear, non-evaporating formula eliminates wear from constant friction and is safe and non-staining.
Moltan 7508 All Purpose Safety Absorbent Lubrimatic 11-151 Standard Straight Short Grease Fitting Lubrimatic 11-311 Straight Grease Fitting
Safety Absorbent? and Safe T Sorb? are premium calcined clay all-purpose absorbents designed for the quick cleanup of water, oil and grease and made from montmorillonite clay, a naturally occurring mineral with superior absorptive ability. Safety Absorbent? and Safe T Sorb? are available in a paper bag or in a leak-resistant and moisture-resistant poly bag. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking.
Lubrimatic 05-061 Curved Grease Gun Extension CLEANER BRK PRT NON-CHLOR 19OZ Blaster 16-CBD Citrus Based Degreaser
Standard length pipe for most hand operated grease guns. 1/8 in NPT each end, 30 deg angle. Cleans brake fluid, grease, oil and other contaminants from all brake parts fast like chlorinated brake cleaners but without chlorinated solvents. Available in a variety of sizes to accommodate any job. Dries quickly and leaves no residue. Biodegradable and non-toxic formula is non-staining. Fast acting, rinses clean with water. Removes tar, grease, oil, resin and ink from virtually any surface. Safely cleans stainless steel.
Brakleen 5089 Brake Parts Cleaner CLEANER CARB/CHK/THRT BDY 20OZ Gumout Regane 800001364 Complete Fuel System Cleaner
The original brake parts cleaner. Formulated to quickly and effectively remove grease, brake dust, brake fluids, oils and other contaminants from brake parts, lining, pads. Quickly dissolves gum, varnish, fuel residues and other deposits from carburetor, PCV valve, automatic choke, carburetor linkage, throttle body and distributor shaft with H.E.S.T for maximum performance and fuel economy. Improves drivability by removing deposits that cause rough idle, stalling and loss of acceleration. Available in a variety of sizes to accommodate any job. Catalytic converter and oxygen sensor-safe. Helps to maximize fuel economy, restore lost horsepower. Helps to clean the entire fuel system, including the intake valves and ports, chamber, cylinder heads, piston tops, fuel lines and fuel injector. Helps eliminates knocks, pings and hesitation, improve acceleration and gas mileage and prevent future deposit build up for 3000 miles. Helps remove water from gasoline. Use every 3000 miles. Treats up to 21 gal of gasoline.
STP 78568 Complete Fuel System Cleaner Liquid Wrench L711 Chain and Wire Lubricant Gunk M914 Silicone Lubricant
This STP? formulation helps clean your entire fuel system in order to restore it to its optimum operating condition. It contains jet fuel, a high-quality carrier of active ingredients. Liquid WRENCH? Chain and cable lube with Cerflon? is for all chains and wire cable, industrial, farm, cycle, ATV. Contains anti-wear additives and synthetic moly for premium performance. Dry time optimized for maximum protection dries only after entering chain links or cable strands. Liquid WRENCH? Heavy-duty silicone spray lubricant is waterproof, rustproof and lubricates. High dielectric characteristics. For rubber, wood, plastic, vinyl and metal.
Permatex 80070 Spray Silicone Lubricant Power Lube 5005 Fast Acting Lubricant Tri-Flow 21010TF Penetrating Lubricant
Permatex? Silicone spray lubricant is a general-purpose liquid aerosol lubricant, primarily designed to reduce friction in no-load bearing mechanical assemblies. The product repels water and protects and renews rubber surfaces. Lubricates and waterproofs all types of mechanical equipment. Stops friction and squeaks. Prevents binding, sticking and deterioration. Non-gumming. Will not mar paint, rubber or plastic surfaces. Fast-acting multi-purpose lubricant. This all-in-one product quickly penetrates, lubricates, stops squeaks, fights corrosion and loosens rusted parts. Tri-Flow? excellent lubricant is the excellent, light-viscosity lube that allows for deep penetration into hard-to-reach moving parts. The drip bottle application, with a convenient straw, allows for deep penetration in hard-to-reach moving parts. High-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475 deg F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion. Formulated with P.T.F.E.
Liquid Wrench L212 Lubricant CATALYST PENETRATING SPRY 11OZ Blaster 16-GDL Door Lubricant
Loosen stuck parts and protect your tools from rust and wear with lubricating oil. Long lasting protection that gets into the tightest spots. Ideal for hinges, hand tools and electric tools. The #1-selling penetrant since 1957, PB B'laster quickly busts loose rusted or frozen parts caused by rust and corrosion. It also contains a non-evaporating lubricant that saves time and equipment and protects against further rust and corrosion. B'laster Garage door lubricant is a silicone-based lubricant that leaves a tack-free film that won't accumulate dust and dirt. Formulated with Teflon? fluoropolymer to help reduce friction and wear. In some instances, its extreme pressure agents make it a suitable replacement for grease. It effectively helps stop squeaks associated with garage doors and mechanisms.
GREASE LITHIUM RED CRTG 14OZ  Lubrimatic 11-113 Standard Grease Fitting Lubrimatic 11-321 Straight Grease Fitting
Industrial and agricultural lithium complex formula. Ideal under temperature and pressure extremes, shock loads and high wear situations. Superior adhesion to bearing and moving parts. Highly water insoluble. Rated GC-LB by NLGI. NLGI #2, drop point 510 deg F. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking.
Rain-X 800002250 Original Glass Treatment Liquid Wrench L112 Penetrating Oil Permatex 80075 Chain Lubricant
Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet and snow, frost, salt, mud, bugs and grime. Liquid WRENCH? Penetrating oil with Cerflon? is a fast-acting, anti-seize formula that penetrates corrosion and loosens rusted bolts and parts. Permatex? Chain lube is a clear, oily liquid aerosol that cleans, lubricants and protects all types of roller chains that operate under exposed conditions. The product dispenses as a foam for thorough and efficient coverage, which continues to penetrate the chain assembly as the foam subsides, forming a film of high lubricity. This film has excellent cohesion and adhesion to the metal surfaces, is not tacky and is extremely water-repellent.