|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with spot watering emitters or to run water to emitter tubing.
|
Remains strong in the hot sun, flexible in cool temperatures. Black Color.
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blank tubing. 1/4 in distribution tubing for drip irrigation. 6 mm OD. Connects with Rain Bird 1/4 in barbed fittings.
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
Remains strong in the hot sun, flexible in cool temperatures. Color-Black.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
Flexible 1/4 in emitter tubing is ideal for extending watering to narrow planting areas and container plants. Each emitter is spaced 12 in apart and emits 1 gph of water.
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird's 1/4 in emitter tubing waters plants uniformly with pre-installed, pressure compensating emitters spaced every 6 in. The emitters are designed for clog-resistant flow at 0.8 gph (gallons per hour) to ensure even, reliable watering. Just cut, place and connect in any arrangement using Rain Bird 1/4 in barbed fittings and stakes (purchased separately). Flexible 1/4 in emitter tubing is ideal for extending watering to narrow planting areas and container plants. Constructed of UV-resistant polyethylene resin materials giving it the flexibility of vinyl with the hold of poly. Unique micro-porous design creates an ultra-tight connection, tubing expands over fittings and shrinks making it almost impossible to remove without cutting. Professional-grade features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage. For installations at or below grade.
|
1/2 in emitter tubing waters plants uniformly with pre-installed pressure compensating emitters spaced every 18 in. Designed for clog-resistant flow at 0.9 gph to ensure even, reliable watering.
|
Drip watering flex vinyl pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip watering flex vinyl pipe.
|
|
|
Visit Us