|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Selkirk Storm Collar, Vent Hole Size: 4 in, Material Gauge: 28, Galvanized Steel, Dimensions: 7-5/8 in OD x 7-9/16 in L, Installation Type: Wall, Suitable for: Type B Gas Vent
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 in A collar, small end collar with crimp.
|
Imperial Connector Union, 4 in Union, Galvanized Steel, 4 in L x 4 in W x 4 in H Dimensions
|
Imperial Connector Union, 5 in Union, Galvanized Steel, 5 in L x 5 in W x 4 in H Dimensions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides a cover for rough wall openings and serves as a firestop.
|
Provides a cover for rough wall openings and serves as a firestop.
|
Provides a cover for rough wall openings and serves as a firestop.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides a cover for rough wall openings and serves as a firestop.
|
Imperial End Cap, Material Gauge: 30 ga, Galvanized, 4 in Dia
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Round End Cap, 5 in, Galvanized, 30 ga Thick Wall
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Corrugated Elbow, 4 in, 30 ga, Galvanized
|
Imperial Round End Cap, 30 ga, Steel, Galvanized, 6 in Diameter
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Chimney Thimble, Material Gauge: 28, Galvanized Steel, Galvanized, Dimensions: 6 x 6 in, Suitable for: Tee Branch and Chimney Section
|
Imperial Round End Cap, Galvanized, 8 in Dia
|
Selkirk Storm Collar, Vent Hole Size: 5 in, Material Gauge: 28, Galvanized Steel, Dimensions: 8-5/8 in OD x 1-9/16 in L, Installation Type: Wall, Suitable for: Type B Gas Vent
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Rain Cap, Square, 30 ga Thick, 3 in Dia, Galvanized Steel
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Selkirk Storm Collar, Vent Hole Size: 6 in, Material Gauge: 28, Galvanized Steel, Dimensions: 9-5/8 in OD x 1-9/16 in L, Installation Type: Wall, Suitable for: Type B Gas Vent
|
Telescopes onto standard Ameri-Vent pipe length for adjustments from 3 to 10 in for 12 in lengths. Made of corrosion-resistant galvanized steel and aluminum as double-wall construction. Ends have a snap-lock coupling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Rain Cap, Square, 30 ga Thick, 4 in Dia, Galvanized Steel
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
Selkirk Roof Flashing, Aluminum/Galvanized Steel, 16 in OAL, 13-1/4 in OAW, Suitable for: 4 in Dia Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Furnace Short Increaser, 3 to 4 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Rain Cap, Round, 30 ga Thick, 6 in Dia, Galvanized Steel, For: Single Wall Pipe
|
Imperial Rain Cap, Square, 30 ga Thick, 5 in Dia, Galvanized Steel
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Telescopes onto standard Ameri-Vent pipe length for adjustments from 3 to 10 in for 12 in lengths. Made of corrosion-resistant galvanized steel and aluminum as double-wall construction. Ends have a snap-lock coupling.
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Corrugated Elbow, 5 in, 28 ga, Galvanized
|
Imperial Round End Cap, Galvanized, 8 in Dia
|
Imperial Furnace Short Increaser, 4 to 5 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Reducer, 4 x 3 in, 26 ga Thick Wall, Galvanized
|
Imperial Corrugated Elbow, 6 in, 28 ga, Galvanized
|
Rugged, double-wall construction of corrosion-resistant galvanized steel and aluminum. Snap-lock coupling ends and lightweight.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
Imperial Stove Pipe Increaser, Galvanized, 24 ga Thick, Dimensions: 4 in Dia x 6 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Reducer, 5 x 4 in, 26 ga Thick Wall, Galvanized
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Furnace Short Increaser, 5 to 6 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Rain Cap, Square, 30 ga Thick, 8 in Dia, Galvanized Steel
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Wall Stack Boot, Galvanized, 3-1/4 in L, 10 in W
|
Selkirk Bird Proof Round Top, Dimensions: 4 in
|
Imperial Furnace Short Increaser, 6 to 7 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Reducer, 6 x 5 in Nominal, 26 ga Wall Thickness, Galvanized
|
Imperial Stove Pipe Reducer, 6 x 4 in Nominal, Reducing Connection, 26 ga Wall Thickness, Galvanized Steel, Galvanized
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Wall Register Boot, Galvanized, 3 in L, 10 in W
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Selkirk? RV round vent pipe is a listed Type B gas vent pipe. Its adjustable fittings and standard short lengths eliminate all cutting, fitting and special engineering. An improved joint design provides for a rapid and secure connection in seconds. The use of our LockTab feature gives installers the option of engaging this tab instead of using sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Furnace Short Increaser, 6 to 8 in, Galvanized, 24 ga
|
Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rugged, double-wall construction of corrosion-resistant galvanized steel and aluminum. Snap-lock coupling ends and lightweight.
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
Imperial Furnace Short Increaser, 7 to 8 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.
|
Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.
|
Combines the properties of two popular insulating materials in one handy roll. It can be used on both heating and air-conditioning ducts, as well as on car and truck hoods and trunks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Stove Pipe Reducer, 8 x 6 in, 26 ga Thick Wall, Galvanized
|
Imperial Stove Pipe Reducer, 7 x 6 in, 26 ga Thick Wall, Galvanized, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Reducer, 8 x 7 in, 26 ga Thick Wall, Galvanized, Black
|
Selkirk? RV round vent pipe is a listed Type B gas vent pipe. Its adjustable fittings and standard short lengths eliminate all cutting, fitting and special engineering. An improved joint design provides for a rapid and secure connection in seconds. The use of our LockTab feature gives installers the option of engaging this tab instead of using sheet metal screws.
|
Telescopes onto standard Ameri-Vent pipe length for adjustments from 3 to 10 in for 12 in lengths. Made of corrosion-resistant galvanized steel and aluminum as double-wall construction. Ends have a snap-lock coupling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
Selkirk? RV round vent pipe is a listed Type B gas vent pipe. Its adjustable fittings and standard short lengths eliminate all cutting, fitting and special engineering. An improved joint design provides for a rapid and secure connection in seconds. The use of our LockTab feature gives installers the option of engaging this tab instead of using sheet metal screws.
|
Rugged, double-wall construction of corrosion-resistant galvanized steel and aluminum. Snap-lock coupling ends and lightweight.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Selkirk Wall Thimble, Specifications: 4 in Size, Galvanized Steel, Silver, Dimensions: 4-5/8 in ID x 8-1/4 in OD x 4-1/8 to 7 in Thick, Suitable for: Type B Gas Vent Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AmeriVent cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The AmeriVent cap is UL listed and its patented design of ports and baffles keep rain and debris out of the vent. In addition, AmeriVent caps permit termination of vents at the minimum height necessary above the roof surface. The AmeriVent cap is used as a ventilation cap as well as a Type B gas vent termination.
|
Use as a ventilation cap as well as Type B vent termination. Protects against waste gases spilling back into the structure through the appliances draft hood.
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
|
Visit Us
