IRON PIPE FITTINGS- GALVANIZED

Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > IRON PIPE FITTINGS- GALVANIZED

Choose a sub category:

GALVANIZED TEE	GALVANIZED REDUCING TEE	GALVANIZED CROSS
GALVANIZED LOCK NUTS	GALVANIZED COUPLING	GALVANIZED REDUCING COUPLING
GALVANIZED PIPE BUSHING	GALVANIZED FLOOR FLANGE	GALVANIZED 90 DEG ELBOW
GALVANIZ REDUCING 90 DEG ELBOW	GALVANIZED 45 DEG ELBOW	GALVANIZED 90 DEG STREET ELBOW
GALVANIZED SIDE OUTLET ELBOW	GALVANIZED 45 DEG STREET ELBOW	GALVANIZED CAP
GALVANIZED UNION	GALVANIZED PLUG	GALVANIZED EXTENSION PIECE

Sort By:

Page of 3


ProSource 2A-1/2G Pipe Elbow, 1/2 in, Threaded, 90 deg Angle Our Price: $2.39		ProSource 18-1/2G Pipe Cap, 1/2 in, Threaded Our Price: $2.39		ProSource 31-1/2G Pipe Plug, 1/2 in, Screw Our Price: $2.39

ProSource Pipe Elbow, Nominal Size: 1/2 in, Threaded Connection, Angle: 90 deg		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.		For steam and water working pressure up to 150 lb. Squared head, right hand threads.


ProSource 24-1/2X1/4G Reducing Pipe Coupling, 1/2 x 1/4 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $2.59		ProSource 24-1/2X3/8G Reducing Pipe Coupling, 1/2 x 3/8 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $2.59		ProSource 18-1/4G Pipe Cap, 1/4 in, Threaded, SCH 40 Schedule, 300 psi Pressure Our Price: $2.59

The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.


ProSource 31-1/4G Pipe Plug, 1/4 in, Screw Our Price: $2.59		ProSource 31-3/8G Pipe Plug, 3/8 in, Screw, Square Head, Steel, SCH 40 Schedule Our Price: $2.59		B & K 510-903HC Lock Nut, 1/2 in Thread, Iron, Galvanized Our Price: $2.79

For steam and water working pressure up to 150 lb. Squared head, right hand threads.		Use for closing and terminating the end of a pipe or fitting. Corrosion-resistant galvanized finish.		Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions of ANSI/ASME B.16.3.


ProSource 21-1/2G Pipe Coupling, 1/2 in, Threaded, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.79		ProSource 2A-3/4G Pipe Elbow, 3/4 in, Threaded, 90 deg Angle Our Price: $2.79		ProSource 18-3/8G Pipe Cap, 3/8 in, Threaded Our Price: $2.79

ProSource Pipe Coupling, Nominal Size: 1/2 in, Threaded Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.34 in L		ProSource Pipe Elbow, Nominal Size: 3/4 in, Threaded Connection, Angle: 90 deg		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.


ProSource 31-3/4G Pipe Plug, 3/4 in, Screw Our Price: $2.79		ProSource 11A-1/2G Pipe Tee, 1/2 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 21-1/4G Pipe Coupling, 1/4 in, FNPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99

For steam and water working pressure up to 150 lb. Squared head, right hand threads.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		ProSource Pipe Coupling, Nominal Size: 1/4 in, FNPT Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.06 in L


ProSource 21-3/4G Pipe Coupling, 3/4 in, Threaded, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 21-1/8G Pipe Coupling, 1/8 in, Threaded, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 3/8GM Pipe Coupling, 3/8 in, NPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99

ProSource Pipe Coupling, Nominal Size: 3/4 in, Threaded Connection, Wall Thickness: 0.12 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.52 in L		ProSource Pipe Coupling, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.19 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 0.96 in L		ProSource Pipe Coupling, Nominal Size: 3/8 in, NPT Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.16 in L


ProSource PPG240-10X6 Reducing Pipe Coupling, 3/8 x 1/8 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $2.99		ProSource 35-1/4X1/8G Pipe Bushing, 1/4 x 1/8 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 35-1/2X1/8G Pipe Bushing, 1/2 x 1/8 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99

The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.


ProSource 35-1/2X1/4G Pipe Bushing, 1/2 x 1/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 35-1/2X3/8G Pipe Bushing, 1/2 x 3/8 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 2A-1/4G Pipe Elbow, 1/4 in, Threaded, 90 deg Angle Our Price: $2.99

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		ProSource Pipe Elbow, Nominal Size: 1/4 in, Threaded Connection, Angle: 90 deg


ProSource 2A-3/8G Pipe Elbow, 3/8 in, Threaded, 90 deg Angle Our Price: $2.99		ProSource 4-1/2G Pipe Elbow, 1/2 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99		ProSource 18-1/8G Hex Pipe Cap, 1/8 in, Threaded, Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $2.99

ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 90 deg		This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		ProSource Hex Pipe Cap, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Steel, 0.53 in L


ProSource 18-3/4G Pipe Cap, 3/4 in, Threaded Our Price: $2.99		ProSource 31-1/8G Pipe Plug, 1/8 in, Screw Our Price: $2.99		ProSource 31-1G Pipe Plug, 1 in, Screw Our Price: $2.99

The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.		For steam and water working pressure up to 150 lb. Squared head, right hand threads.		For steam and water working pressure up to 150 lb. Squared head, right hand threads.


ProSource 4-1/4G Pipe Elbow, 1/4 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $3.29		ProSource 6-1/2G Street Pipe Elbow, 1/2 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $3.29		ProSource 24-1/4X1/8G Reducing Pipe Coupling, 1/4 x 1/8 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $3.49

This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.


ProSource 24-3/8X1/4G Reducing Pipe Coupling, 3/8 x 1/4 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $3.49		ProSource 24-3/4X1/2G Reducing Pipe Coupling, 3/4 x 1/2 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $3.49		ProSource 510-132HN Reducing Pipe Elbow, 1/2 x 3/8 in, FIPT, 90 deg Angle, Iron, 300 psi Pressure Our Price: $3.49

The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		ProSource Reducing Pipe Elbow, Nominal Size: 1/2 x 3/8 in, FIPT Connection, Angle: 90 deg, 300 psi, Operating Temperature: -20 to 150 deg F, Iron


ProSource 11A-1/4G Pipe Tee, 1/4 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79		ProSource 11A-3/8G Pipe Tee, 3/8 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79		ProSource 35-3/8X1/8G Pipe Bushing, 3/8 x 1/8 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79

This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.


ProSource 35-3/8X1/4G Pipe Bushing, 3/8 x 1/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79		ProSource 35-3/4X1/4G Pipe Bushing, 3/4 x 1/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79		ProSource 35-3/4X3/8G Pipe Bushing, 3/4 x 3/8 in, MIPT x FIPT, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.


ProSource 35-3/4X1/2G Pipe Bushing, 3/4 x 1/2 in, MIP x FIP, 300 psi Pressure Our Price: $3.79		ProSource 2B-3/4X1/2G Reducing Pipe Elbow, 3/4 x 1/2 in, Threaded, 90 deg Angle Our Price: $3.79		ProSource 6-1/4G Street Pipe Elbow, 1/4 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 1/2 in, Threaded Connection, Angle: 90 deg		This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.


ProSource 6-3/8G Street Pipe Elbow, 3/8 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $3.79		ProSource 18-1G Pipe Cap, 1 in, Threaded Our Price: $3.79		ProSource 6-3/4G Street Pipe Elbow, 3/4 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $3.99

This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.		This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.


ProSource 11A-3/4G Pipe Tee, 3/4 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $4.29		ProSource 2A-1G Pipe Elbow, 1 in, Threaded, 90 deg Angle Our Price: $4.29		ProSource PPG120-10 Pipe Elbow, 3/8 in, Threaded, 45 deg Angle, 150 psi Pressure Our Price: $4.29

This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		ProSource Pipe Elbow, Nominal Size: 1 in, Threaded Connection, Angle: 90 deg		ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 45 deg, 150 psi


ProSource 4-3/4G Pipe Elbow, 3/4 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $4.29		ProSource 11A-1/8G Pipe Tee, 1/8 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $4.59		ProSource 21-1G Pipe Coupling, 1 in, Threaded, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $4.59

This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		ProSource Pipe Coupling, Nominal Size: 1 in, Threaded Connection, Wall Thickness: 0.13 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.67 in L


ProSource 24-3/4X1/4G Reducing Pipe Coupling, 3/4 x 1/4 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $4.59		ProSource 24-1X3/4G Reducing Pipe Coupling, 1 x 3/4 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $4.59		ProSource 35-1X1/2G Pipe Bushing, 1 x 1/2 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $4.59

The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.


ProSource 35-1X3/4G Pipe Bushing, 1 x 3/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $4.59		ProSource 2A-1/8G Pipe Elbow, 1/8 in, Threaded, 90 deg Angle Our Price: $4.59		ProSource PPG120-6 Pipe Elbow, 1/8 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $4.59

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		ProSource Pipe Elbow, Nominal Size: 1/8 in, Threaded Connection, Angle: 90 deg		This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.


ProSource 31-1-1/4G Pipe Plug, 1-1/4 in, Screw Our Price: $4.59		ProSource 24-3/4X3/8G Reducing Pipe Coupling, 3/4 x 3/8 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $4.79		ProSource 24-1X1/2G Reducing Pipe Coupling, 1 x 1/2 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $4.79

For steam and water working pressure up to 150 lb. Squared head, right hand threads.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.


ProSource PPG90R-10X8 Reducing Pipe Elbow, 3/8 x 1/4 in, Threaded, 90 deg Angle Our Price: $4.79		ProSource 4-1G Pipe Elbow, 1 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $4.79		ProSource PPG121-15 Street Pipe Elbow, 1/2 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $4.79

ProSource Reducing Pipe Elbow, Nominal Size: 3/8 x 1/4 in, Threaded Connection, Angle: 90 deg		This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.


ProSource 11A3/4X3/4X1/2G Pipe Tee, 3/4 x 3/4 x 1/2 in, FIPT, Malleable Steel, SCH 40 Schedule Our Price: $4.99		ProSource 18-1-1/4G Pipe Cap, 1-1/4 in, Threaded Our Price: $4.99		B & K 511-613BG Pipe Extension Piece, 1/2 in, FIP x MIP, Iron, 150 lb Pressure Our Price: $4.99

This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.		B & K Pipe Extension Piece, Nominal Size: 1/2 in, FIP x MIP Connection, 150 lb, Iron


ProSource 11A-1G Pipe Tee, 1 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $5.39		ProSource PPG130R-15X10 Pipe Tee, 1/2 x 1/2 x 3/8 in, FIPT, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $5.39		ProSource PPG240-25X10 Reducing Pipe Coupling, 1 x 3/8 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $5.69

This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.


ProSource PPG90R-20X10 Reducing Pipe Elbow, 3/4 x 3/8 in, Threaded, 90 deg Angle Our Price: $5.69		ProSource 2B1X3/4G Pipe Elbow, 1 x 3/4 in, Female, 90 deg Angle, Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $5.69		ProSource 6-1/8G Street Pipe Elbow, 1/8 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $5.69

ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 3/8 in, Threaded Connection, Angle: 90 deg		Reducing elbow, 90 deg angle, 1 in, 3/4 in, with female NPT threads for connecting to a male pipe or fitting.		This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.


ProSource 6-1G Street Pipe Elbow, 1 in, Threaded, 90 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $5.69		ProSource 7-3/4G Street Pipe Elbow, 3/4 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $5.69		ProSource PPG130R-20X15X15 Pipe Tee, 3/4 x 1/2 x 1/2 in, FIPT, Malleable Steel, SCH 40 Schedule Our Price: $5.99

This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.


ProSource 35-1-1/4X3/4G Pipe Bushing, 1-1/4 x 3/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $5.99		ProSource 35-1-1/4X1G Pipe Bushing, 1-1/4 x 1 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $5.99		ProSource 18-1-1/2G Pipe Cap, 1-1/2 in, Threaded Our Price: $5.99

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.


B & K 511-614 Pipe Extension Piece, 3/4 in Our Price: $5.99		ProSource 21-1 1/4G Pipe Coupling, 1-1/4 in, Threaded, Malleable Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $6.49		ProSource 24-11/4X1G Reducing Pipe Coupling, 1-1/4 x 1 in, Threaded, Malleable Steel, SCH 40 Schedule Our Price: $6.49

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.		ProSource Pipe Coupling, Nominal Size: 1-1/4 in, Threaded Connection, Wall Thickness: 0.14 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.93 in L		The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.


ProSource 35-1-1/2X1G Reducing Hex Pipe Bushing, 1-1/2 x 1 in, Female x Male, Steel, SCH 40 Schedule, 300 psi Pressure Our Price: $6.49		ProSource 35-1-1/2X1-1/4G Pipe Bushing, 1-1/2 x 1-1/4 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $6.49		ProSource 35-1-1/4X1/2G Pipe Bushing, 1-1/4 x 1/2 in, MIP x FIP, SCH 40 Schedule, 300 psi Pressure Our Price: $6.49

ProSource Reducing Hex Pipe Bushing, Nominal Size: 1-1/2 x 1 in, Female x Male Connection, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Hex Size: 2 in, Steel, 1.14 in L		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.		The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.


ProSource PPG121-8 Street Pipe Elbow, 1/4 in, Threaded, 45 deg Angle, SCH 40 Schedule, 300 psi Pressure Our Price: $6.49		ProSource 31-1-1/2G Pipe Plug, 1-1/2 in, Screw Our Price: $6.49		ProSource PPG130R-20X15X20 Pipe Tee, 3/4 x 1/2 x 3/4 in, FIPT, Malleable Steel, SCH 40 Schedule Our Price: $6.99

This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.		For steam and water working pressure up to 150 lb. Squared head, right hand threads.		This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.