|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Coupling, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Coupling, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Cap, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Street Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Pipe Coupling, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Elbow, Nominal Size: 1/2 in, Female x Solvent Weld Connection, Angle: 90 deg, 140 psi, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
The NIBCO? CPVC-CTS male adapter is made of FlowGuard Gold? CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications. The CPVC-CTS male adapter features a female socket x male NPT threaded connection and provides a means for adapting a solvent weld connection to a threaded connection. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO? plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
|
Nibco Pipe Cap, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Bushing, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Street Pipe Elbow, Nominal Size: 3/4 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
The NIBCO? CPVC-CTS male adapter is made of FlowGuard Gold? CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications. The CPVC-CTS male adapter features a female socket x male NPT threaded connection and provides a means for adapting a solvent weld connection to a threaded connection. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO? plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Elbow, Nominal Size: 3/4 in, Slip Connection, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Pipe Tee, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Tee, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Tee, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Tee, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Street Pipe Elbow, Nominal Size: 3/4 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Street Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Drop Ear Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Drop Ear Pipe Elbow, Nominal Size: 1/2 in, FIP Connection, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Elbow, Nominal Size: 3/4 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Pipe Cap, Nominal Size: 1 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Tee, Nominal Size: 1 x 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Elbow, Nominal Size: 1 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
Nibco Pipe Coupling, Nominal Size: 1 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
Nibco Pipe Bushing, Nominal Size: 1 x 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo Test Pipe Plug, Nominal Size: 3/4 in, Barb Connection, Suitable for: PEX Pipe
|
Nibco Pipe Adapter, Nominal Size: 3/4 in, Slip x FIP Connection, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo Test Pipe Plug, Nominal Size: 1/2 in, Barb Connection, Suitable for: PEX Pipe
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
The SharkBite? PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well each sold separately.
|
Nibco Pipe Elbow, Nominal Size: 1 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Adapter, Nominal Size: 1/2 in, Slip x FIP Connection, CPVC
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC or metal. CSA approved.
|
Nibco Pipe Adapter, Nominal Size: 1 in, Slip x FIP Connection, CPVC
|
Nibco Pipe Adapter, Nominal Size: 1 in, Slip x MIP Connection, CPVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
Used for capping off PEX fittings. Bar coded.
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nibco Pipe Coupling, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
Apollo expansion PEX female adapters are manufactured using lead-free dezincification resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with Uponor (Wirsbo) ProPEX? piping systems. ProPEX? is a trademark of Uponor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo expansion PEX female adapters are manufactured using lead-free dezincification resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with Uponor (Wirsbo) ProPEX? piping systems. ProPEX? is a trademark of Uponor.
|
For joining two cut pieces of flex-drain (not included), Use to adapt flex-drain to wyes and tees to help provide good fit and function. Adapts flex-drain to end caps and pop-up emitters (caps and emitters not included). Female connections. Minimum working temperature of -50 deg F and a maximum working temperature of 150 deg F. Maximum working pressure of 70 psi, Polypropylene construction, Rated for soil drain and underground use.
|
Used for capping off PEX fittings. Bar coded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 3/8 x 1/2 in, Barb x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Plumbing System
|
Legend Insert Stiffener, Nominal Size: 3/4 in, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 3/4 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 3/4 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
The SharkBite? PEX barb sweat female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a female sweat connection that can be soldered.
|
The SharkBite? PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite? PEX barb fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well (each sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.
|
Apollo ExpansionPEX couplings are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEX-a pipe, the fittings offer a larger I.D. than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-a pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for inserting a plug into the end of a pipe. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.
|
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
|
|
|
Visit Us
