Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES & COVERS > METAL ELECTRICAL BOXES
Sort By:
Page of 1
OLD WORK PAN STL 3-1/2 X 1/2IN Hubbell 519 Gangable Switch Box Raco 560 Gangable Switch Box
Raco Old Work Pan, Steel, Galvanized, 1.348 in Length, 4.843 in Width, Ceiling Mounting, Suitable for: Old Work Bracket Four cable knockouts (end). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls. For conduit. 3 in x 2 in switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14 cu-in capacity, 2-3/4 in deep, four 1/2 in side knockouts, two 1/2 in bottom knockouts and two 1/2 in end knockouts. Acceptable for use in 2 hrs rated fire walls. UL listed.
Raco 528 Gangable Switch Box Hubbell 8500 Gangable Switch Box Raco 473 Gangable Switch Box
Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Conduit wiring system. Four 1/2 in conduit knockouts (sides). Two 1/2 in conduit knockouts (end). Two 1/2 in conduit knockouts (bottom). Less clamps. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed.
Hubbell 8531 Gangable Switch Box Raco 567 Gangable Switch Box Raco 400 Gangable Switch Box
Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work switch box for easy installation of GFCI or other large devices. Use with a midi or oversized switch plate. Four 1/2 in conduit knockouts (sides). Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. 3 in x 2 in x 2-3/4 in D. 14 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls. 1-1/2 in D. 7.5 cu-in. UL listed.
Raco 420 Gangable Switch Box Hubbell 410 Non- Gangable Switch Box Raco 404 Non-Gangable Shallow Switch Box
Raco Switch Box, Cable Entry: Conduit, Number of Knockouts: 9, Knockout Size: 1/2, 3/4 in, Number of Gangs: 1, Cubic Capacity: 10.3 cu-in Four cable knockouts on the end. 3 in x 2 in x 1-1/2 in D. 7.5 cu-in. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hrs fire rated walls. UL listed. Shallow switch box, made for use with furring strips and 1/4 in paneling. Welded, with non-metallic sheathed cable clamps. Two cable knockouts (end). One 1/2 in' conduit knockout (end). D bracket for wood or metal studs. 1/4 in bracket setback. 1 in D. 6.5 cu-in. UL listed.
Raco 976 Extension Ring Switch Box Hubbell 518 Gangable Switch Box Hubbell 471 Gangable Switch Box
Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall. One 1/2 in bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL listed. UPC bar coded. Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2 hrs rated walls. Four cable knockouts (end). One 1/2 in conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3 in x 2 in x 2-1/4 in D. 10.5 cu-in. UL listed.
Raco 8355 Non-Gangable Switch Box Raco 545 Non-Gangable Old Work Switch Box Raco 487 Gangable Old Work Switch Box
Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs rated walls. UL listed. Four cable knockouts (end). Two 1/2 in knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3 in x 2 in x 2-1/2 in D, 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include brackets for direct installations on stud, leveling bumps or locking grips for old work.
Raco 529 Gangable Switch Box Raco 8601 Gangable Switch Box Raco 508 Non-Gangable Switch Box
Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). "LB" bracket for wood studs, 5/8 in offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. UL listed. Raco Switch Box, Cable Entry: Knockout, Number of Outlets: 1, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 4.219 in H x 2.25 in W x 3.5 in D, Steel, Gray, Pre-Galvanized, Suitable for: Switches, Outlet, Includes: Plaster Ear Two 1/2 in conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4 in sheetrock maximum thickness. Acceptable for use in 2 hrs fire rated walls. 12.5 cu-in capacity. Measures 3 in x 2 in x 2-1/2 in. UL listed.
Raco 605 Gangable Switch Box Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box Carlon Adjust-A-Box MB238ADJ Adjustable Switch Box
Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 7 in H x 2.563 in W x 3.5 in D, Steel, Gray, Bracket Mounting, Suitable for: Switches, Outlet, Includes: TS Side-Mount Bracket with Gauging Tabs, Recessed Nailing Spurs Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL listed. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL listed.
Tiger Grip 517 Gangable Switch Box Raco 509 Old Work Switch Box BOX SW 2-1/2DP TS-BRKT MC-CLMP
Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 1, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 12.5 cu-in, Dimensions: 4.25 in H x 2.56 in W x 2.5 in D, Steel, Gray, Nail-On Mounting, Suitable for: Switches, Outlet, Includes: Plaster Ear, Tigergrip Clip Conduit wiring system. Gangable switch box offers the option of constructing a box to hold two or more devices. Adjustable plaster ears allow box to be used in old work applications. Provided old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Two 1/2 in bottom knockouts and two 1/2 in end knockouts. 2-1/2 in deep, 12.5 cu-in. UL listed. One 1/2 in bottom and two 1/2 in end conduit knockouts and four cable knockouts. With armored cable/metal clad/flex clamps. TS brackets for wood or metal studs, with 1/2 in setback. Gauging tabs and recessed nailing spur, less ears. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL listed. UPC bar coded.