Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > EPOXY ADHESIVES
Sort By:
Page of 1
Flow-Mix 21445 Epoxy Devcon S208 Epoxy Anchoring Adhesive Henkel Quick Set Epoxy Resin
A super-fast, clear, non-shrinking, general-purpose epoxy that provides instant adhesion. Complete with a blue dye indicator, the blue color disappears when epoxy is thoroughly mixed. Water-resistant, fills gaps. Useful for repair of toys, appliances, furniture, jewelry and more. A two-part, rapid curing, clear, general-purpose epoxy. Better on more rigid materials. Useful for repair of autos, bikes, boats, golf clubs, skis and much more. May also be used as a metal filler and to restore rotten wood. Loctite? epoxy quick set is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 5 min for most projects. Available in a convenient dual syringe which delivers equal parts of both components every time. Loctite? Epoxy Quick Set can be used as an adhesive for a wide range of materials or as a versatile filler for gap filling, surface repairs and laminating. Loctite? Epoxy quick set does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching. It can be sanded and drilled.
5 Minute S205 Fast-Curing Thixotropic Epoxy Adhesive 2 Ton S31 Medium-Cure Epoxy Adhesive Devcon S-5 VersaChem Plastic Steel Epoxy
A two-part, rapid curing, clear, general-purpose epoxy. Better on more rigid materials. Useful for repair of autos, bikes, boats, golf clubs, skis and more. May also be used as a metal filler and to restore rotten wood. Resists water, gasoline, diesel, kerosene and most other chemicals. Extremely strong, non-shrinking adhesive compound specially formulated for moderate strength and water resistance. A two-part, high strength, cold-welding epoxy that can be drilled, threaded, machined or filled once fully cured. Fills holes, repairs cracks. Contains a steel alloy that does not rust. Use on all types of metals. Repairs broken furniture, tools, appliances, toys, autos and much more. Non-flammable, non-rusting.
ITW Permatex 84101 Permapoxy Epoxy Devcon S220 Impact Resistant Water Resistant Plastic Welder ITW Permatex 84115 Permapoxy Epoxy
Versatile, easy-to-use, general-purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in 5 mins, no clamping needed. Clear appearance, fills gaps and will not shrink. Resistant to water and solvents. Self-mixing dual syringe blends the adhesive and filler as it dispenses, eliminating the need for manual mixing. A strong structural adhesive formulated for bonding similar and dissimilar materials as well as unprepared metals. Resists weathering, high humidity and temperature variations. Minimal surface preparation required. Cured adhesive can be drilled, sanded and painted. A structural adhesive designed for general-purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5 to 6 mins and fixturing in 9 to 10 mins. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in 5 mins at room temperature. Cream appearance, gap filling to 0.125 in. Water-resistant and good chemical- resistance.
Loctite 1360788 Epoxy Plastic Bonder EPOXY QUICK SETTING CLEAR 14ML Loctite Mastermind Epoxy Metal/Concrete Resin
Loctite? epoxy plastic bonder is an acrylic formula that is specially formulated to bond and repair plastic surfaces. The convenient double syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 min. Loctite? Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled. ClearWeld? is a quick setting, multi-purpose two-part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld? is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld? has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hr. With a tensile strength of 3900 psi, ClearWeld? sets to a hard, permanent bond. Loctite? epoxy metal or concrete is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high strength bond in 5 to 12 mins. It is used as an adhesive for repairing, filling and re-building all metal and concrete surfaces. Loctite? epoxy metal or concrete does not conduct electricity which is ideal for sealing electrical components. It cures to a metallic gray finish and can be easily sanded or machined. It does not shrink and is resistant to water and most common solvents.
Protective Coating PC-11 Marine? Epoxy 5 Minute S210 Fast-Curing Thixotropic Epoxy Adhesive J-b Weld PlasticWeld Quick Setting Epoxy Adhesive
PC-11? thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7? and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can?t remove water and moisture or you want the white color for your repair, PC-11? is your choice. Choose PC-11? for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11? formulation is slow-curing, but slow can be a good thing especially for large tasks. A two-part, high strength, rapid curing gel formula epoxy. Ideal for vertical and overhead applications. Will not drip or sag. Great for filling gaps. Complete with a blue dye indicator, the blue dye disappears when the epoxy is thoroughly mixed. PlasticWeld? is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld? will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld? sets in 5 mins at room temperature and is fully cured in 1 hr. Using a 1:1 mixing ratio, PlasticWeld? combines to a tensile strength of 3200 psi and cures to an off-white color.
PC-Clear 70147 Fast Curing Medium Viscosity Epoxy Adhesive Devcon 44029 Epoxy Putty PC-Super 16619 Epoxy Putty
PC-CLEAR? epoxy is a medium viscosity liquid epoxy system with greater clarity than other epoxies. This product is excellent for repairs and projects that must be less visible such as art objects or collectibles. PC-CLEAR? epoxy is fast-curing but allows ample time to apply and position the repair. After curing the epoxy does not become brittle, instead cured PC- Clear? forms a tough resilient bond. PC-CLEAR? can be used on more than just cosmetically critical repairs and in addition it can be used for automotive, construction and facility repairs. Use PC-CLEAR? when you are concerned about appearance of your repair and a liquid epoxy is what you are looking for. Magnum steel is a fast-curing, two-part epoxy putty stick that permanently repairs leaks, holes and cracks. When fully cured, it can be drilled, filed, sanded and painted. Use it to repair pipes, tanks, radiators, couplings and more. PC-SUPEREPOXY? is a non-drip translucent paste epoxy suitable for conventional or static mixing. It has unlimited uses in bonding, assembling, filling and sealing most materials. Unlike conventional liquid epoxies, PC-SUPEREPOXY? can be applied via a static mix nozzle vertically and overhead. It cures quickly at room temperature to form a resilient, non-conductive bond or seal that resists most chemicals, fresh and salt water, gasoline and fuel oil. Works great bonding steel to wood, fiberglass, aluminum, concrete, brick, glass, block, ceramics, hard plastics and much more. PC-SUPEREPOXY? is the toughest, highest strength epoxy we manufacture.
J-B Weld 8276 Jb Kwik Weld Cold Weld Compound J-b Weld PlasticWeld KwikPlastic Epoxy Putty Loctite Instant Mix Epoxy Resin
J-B KwikWeld? is a fast setting version of the original J-B Weld? two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld? has a 1:1 mixing ratio, sets in 6 mins and is fully cured in 4 to 6 hrs. J-B KwikWeld? cures to a dark gray color, is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 deg F. PlasticWeld? is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to buildup and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld? has a 20 to 25 mins work life, functional cure occurs in 2 to 3 hrs. PlasticWeld? cures to an off-white color, is rated at a tensile strength of 350 psi. Loctite? epoxy instant mix 5 - min is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 min and reaches handling strength in 1 hr. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Loctite? Epoxy Instant Mix 5 min does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
SYRINGE WELD STEEL 25ML J-B Weld 8265S Jb Weld Cold Weld Compound EPOXY GLUE GORILLA 0.85OZ
Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in 4 mins, no clamping needed. Dark gray appearance, fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. J-B Weld? is the original cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld? sets in 4 to 6 hrs to a dark gray color. A full cure is reached in 15 to 24 hrs. J-B Weld? has a tensile strength of 3960 psi and sets to a hard bond overnight. It can withstand temperatures up to 550 deg F when fully cured. Gorilla takes epoxy to the Gorilla tough level. With its great solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy-to-dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.
PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive Protective PC-11 2OZ. Pc-11 Epoxy Paste PC-Metal 25550 Hand Moldable Epoxy Putty
PC-FAHRENHEIT? putty epoxy is the choice for temperatures up to 500 deg F. It is supplied as a pre-measured stick that you mix with fingers. Fast-curing (60 mins). Best for steam heat applications. A toolbox must. Great on copper and iron. PC-11? thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7? and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can?t remove water and moisture or you want the white color for your repair, PC-11? is your choice. Choose PC-11? for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11? formulation is slow-curing, but slow can be a good thing especially for large tasks. PC-METAL? putty epoxy replaces metal. Mix with fingers and apply. Quickly PC-METAL? cures to re-attach metal (30 mins). Cures hard, fast, non-conductive. Contains metal, sticks to metals such as cast iron, zinc, aluminum, stainless steel, steel and copper.
PC-Lumber 25574 Moldable Epoxy Putty PC-Marine 25567 Hand Moldable Epoxy Putty J-b Weld 8272 2-Part Marineweld Epoxy
PC-LUMBER? epoxy putty is pre-measured and mixed by hand. It is used as a filler where a small amount will solve the problem. Within 60 mins it is cured and ready. The putty can be easily formed and shaped. PC-MARINE? epoxy putty stick is a specially formulated epoxy putty suitable for wet or underwater applications. Incredibly it has an extended open time (20 to 30 mins) but cures hard within 60 mins for a fast return to service and emergency repairs. It sticks great to metals, fiberglass, tile, wood and some plastics such as ABS and rigid PVC. J-B MarineWeld? is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld? sets in 4 to 6 hrs at room temperature and is fully cured to a dark gray color in 15 to 24 hrs. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the water surface.
J-B Weld 8267S J-B Steelstik Adhesive/Sealant Protective 027776 Pc-7 Epoxy Paste PC-Woody PC-WOODY 1.5OZ Wood Filler Epoxy Adhesive
SteelStik? is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to buildup, patch and repair steel components. SteelStik? sets in 3 to 5 mins and after 60 mins, can be drilled, tapped, machined, ground, filed and painted. SteelStik? cures to a dark gray color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F. PC-7? is the original tough job epoxy, this paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. Professionals to the do-it-yourselfers select PC-7? because of its exceptional adhesion to metals, ceramics, masonry and many plastics. PC-7? is designed for permanent repairs. Where other adhesives fail PC-7? won?t. Choose PC-7? if you want to seal a crack in a wall, attach a hanger to a ceramic plaque, seal a leak in an oil pan, repair a granite monument, fix a leak in PVC pipe connection, create a multi-media sculpture and thousands of other repairs. When mixed, part-A (gray) and the hardener part-B (black) react to form a bond of tremendous strength. The PC-7? formulation is slow-curing, but slow can be a good thing especially for large tasks. PC-WOODY? is a two-part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle.
PC-Crete 25581 Hand Moldable Epoxy Putty Loctite Mastermind Epoxy Putty J-b Weld ClearWeld Quick Setting Epoxy Syringe
PC-CRETE? epoxy is a hand-mixable, fast-setting epoxy putty that quickly repairs concrete and masonry. After mixing, it forms a concrete repair polymer that cures to a concrete-like color and texture. The mixture readily sticks to concrete and masonry surfaces and is easily shaped. It will stick to ceramics, glass, metals and some plastics. It cures within 60 mins. Each stick contains pre-measured portions of activator and base, no measuring or mixing tools are necessary. Loctite? repair putty multi-purpose is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. Loctite? repair putty multi-purpose does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. Loctite epoxy putty can be sanded, drilled and painted. ClearWeld? is a quick-setting, multi-purpose, two-part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld? is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld? has a 1:1 mixing ratio, sets in 5 mins and cures in 1 hr. With a tensile strength of 4400 psi, ClearWeld? sets to a hard, permanent bond.
J-b Weld KwikWeld Quick Setting Epoxy Syringe J-B Weld 8277 Epoxy Adhesive EPOXY CLEAR 25ML SYRINGE W/CAP
J-B KwikWeld? is a fast setting version of the original J-B Weld? two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld? has a 1:1 mixing ratio, sets in 6 mins and is fully cured in 4 to 6 hrs. J-B KwikWeld? cures to a dark gray color, is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 deg F. WaterWeld? will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld? has a set time of 15 to 25 mins and sets hard in 1 hr. WaterWeld? cures to an off-white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F. MinuteWeld? is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld? will set under most temperature conditions in one min. MinuteWeld? is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.
ADHESIVE-GAP FILLER BLACK 25ML ADHESIVE STRUCTURAL TAN 25ML H2 Hold VersaChem Flexible Underwater Epoxy Syringe
PlasticBonder? is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. PlasticBonder? has a 1:1 mixing ratio, sets in 15 min and can be sanded after 30 min. With a tensile strength of 3770 psi, PlasticBonder? sets black in color and cures to a hard, permanent bond. PlasticBonder? is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. PlasticBonder? has a 1:1 mixing ratio, sets in 15 mins and can be sanded after 30 mins. With a tensile strength of 3770 psi, PlasticBonder? sets to a tan color and cures to a hard, permanent bond. A two-part, super flexible, toughened, non-corrosive epoxy specially designed for wet or dry bond on almost anything. Waterproof, sticks and cures underwater. Resists shock and vibration. Use to make repairs on autos, boats, bikes, toys, pools and much more.
EPOXY MARINE 25ML SYRNGE W/CAP Protective Coating PC-7 2-Part Epoxy Adhesive PC-Woody PC-WOODY 6OZ Wood Filler Epoxy Adhesive
MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. MarineWeld has a 1:1 mixing ratio that sets in 5 minutes at room temperature, and cures in an hour to a white color. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters' surface. MarineWeld has a tensile strength of 2350 PSI. PC-7? is the original tough job epoxy, this paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. Professionals to the do-it-yourselfers select PC-7? because of its exceptional adhesion to metals, ceramics, masonry and many plastics. PC-7? is designed for permanent repairs. Where other adhesives fail PC-7? won?t. Choose PC-7? if you want to seal a crack in a wall, attach a hanger to a ceramic plaque, seal a leak in an oil pan, repair a granite monument, fix a leak in PVC pipe connection, create a multi-media sculpture and thousands of other repairs. When mixed, part-A (gray) and the hardener part-B (black) react to form a bond of tremendous strength. The PC-7? formulation is slow-curing, but slow can be a good thing especially for large tasks. PC-WOODY? is a two-part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle.
ADHESIVE HARDENER 4.5OZ Protective Coating PC-11 Marine Grade Epoxy Adhesive 5-Minute S209 VersaChem Epoxy Adhesive
A clear, extremely strong, non-shrinking adhesive, specially formulated for moderate strength and water-resistance. PC-11? thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7? and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can?t remove water and moisture or you want the white color for your repair, PC-11? is your choice. Choose PC-11? for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11? formulation is slow-curing, but slow can be a good thing especially for large tasks. A two-part, rapid curing, clear, general-purpose epoxy. Better on more rigid materials. Useful for repair of autos, bikes, boats, golf clubs, skis and much more. May also be used as a metal filler and to restore rotten wood.
EPOXY REINFORCED STEEL TWN 5OZ EPOXY PROFESSIONAL CLEAR 8OZ Protective Coating PC-7 2-Part Epoxy Adhesive
ClearWeld? is the original cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4 to 6 hr to a dark Gray color. A full cure is reached in 15 to 24 hr. J-B Weld has a tensile strength of 5020 psi and sets to a hard bond overnight. It can withstand temperatures up to 550 deg F when fully cured. ClearWeld? professional size is professional size of our quick setting, multipurpose two-part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld? is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld? has a 1:1 mixing ratio, sets in 5 min and cures in 1 hr with a tensile strength of 3900 psi, ClearWeld? sets to a hard, permanent bond. PC-7? is the original tough job epoxy, this paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. Professionals to the do-it-yourselfers select PC-7? because of its exceptional adhesion to metals, ceramics, masonry and many plastics. PC-7? is designed for permanent repairs. Where other adhesives fail PC-7? won?t. Choose PC-7? if you want to seal a crack in a wall, attach a hanger to a ceramic plaque, seal a leak in an oil pan, repair a granite monument, fix a leak in PVC pipe connection, create a multi-media sculpture and thousands of other repairs. When mixed, part-A (gray) and the hardener part-B (black) react to form a bond of tremendous strength. The PC-7? formulation is slow-curing, but slow can be a good thing especially for large tasks.
Protective Coating PC-11 Marine Grade Epoxy Adhesive ITW 5 Minute Flow-Mix Automix Epoxy
PC-11? thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7? and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can?t remove water and moisture or you want the white color for your repair, PC-11? is your choice. Choose PC-11? for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11? formulation is slow-curing, but slow can be a good thing especially for large tasks. A two-part, rapid curing, clear, general-purpose epoxy. Better on more rigid materials. Useful for repair of autos, bikes, boats and more. May also be used as a metal filler and to restore rotten wood. Apply mixed epoxy directly to your repair. The Flow-Mix? nozzles automatically mixes resin and hardener together.