|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four No.8 x 3/4 in Phillips pan head sheet metal screws.
|
N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in thick door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
Nylon base; fits Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H nylon base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/4 x 2 in, universal bi-fold door aligner, yellow zinc plated finish.
|
N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. It is used with the Acme top pivot N 6672.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Commonly used by Kenna Frame as well as countless other bi-fold door manufacturers.
|
Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
National Hardware Guide Roller, Bearing Type: Ball, Steel, Zinc, Suitable for: Folding Door Frames
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6545 is a top mount bi-fold door pivot. Used on Acme and Cox doors, the spring-loaded 3/8 in pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
N 6611 is a spring-loaded 3/4 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 in to 1-3/8 in thick and up to 30 lb.
|
National Hardware V391UP Folding Door Upper Pivot, Steel, Zinc, Suitable for: 7/8 in Track Systems, Includes: (1) Pivot, (1) Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel base; fits Acme and Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H steel base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6707 is a bottom mount pivot used by Johnson Hardware and many other bi-fold door manufacturers. The 7/16 in Dia nylon base houses a 1/4 in pivot bolt with a unique star adjustment nut.
|
N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the Pivot Bracket.
|
N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon.
|
3/8 in and 7/16 in post diameter. Replacement top guide kit fits Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
|
N 6612 is a spring-loaded 1/4 in steel pivot pin in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top back edge of a bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6614 is a spring-loaded 7/8 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick and up to 30 lb.
|
National Hardware V530 Door Hinge, 25 lb Weight, Pin Type: Removable, Door Thickness: 1 in, Surface Mounting, Steel, Brass, Dimensions: 3 in W, Suitable for: 1 in Thick Bi-Fold Doors
|
Repair kit is for 3/8 in Dia holes. Fits 7/8 in wide top tracks. Kit includes most parts needed to repair one 2 door set.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 36 in L, Suitable for: Bi-Fold Doors
|
N 7273 is a set of nickel-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 48 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 60 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 72 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
For doors 12 to 18 in W, 1-3/4 in thick, weighing up to 30 pounds each. 14 to 16 ga zinc dichromate plated steel parts. Control arms can be adjusted accommodate non-standard door panel widths. Set includes (1) 1601 control arm, (3) 1605 hinges, (3) 1703 hinges, (1) 1513 door stop, (5) 1808 door aligner and (1) 33 door knob.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
The attractive, contemporary-styled Contempra folding door has a vertically embossed surface embedded with specially blended vinyl.
|
Durable and maintenance-free, Oakmont Doors are a ideal choice for any room. They are crafted of energy-efficient, double wall vinyl panels with flexible vinyl hinges. Finish coated with scratch-resistant, clear UV varnish, the doors fit openings from 24 in to 36 in wide by 80 in high and trim easily to any height. Vinyl panels may be removed for door openings less than 36 in wide. You can also install Oakmont as a double door, using two single doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable and maintenance-free, Oakmont doors are a ideal choice for any room. They are crafted of energy-efficient, double wall vinyl panels with flexible vinyl hinges.
|
The Encore folding door is an energy-efficient, double wall vinyl panel door with flexible vinyl hinges. Finishes are coated with scratch-resistant, clear UV varnish that resists fading.
|
|
|
Visit Us
