|
|
|
|
|
|
|
|
|
|
|
|
|
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For installation from SCH 40/80 non-metallic conduit runs into meter box. Will not rust or corrode.
|
Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
For installation from SCH 40/80 non-metallic conduit runs into meter box. Will not rust or corrode.
|
For use on all Siemens and Murry single position meter sockets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
For use on all Siemens and Murry single position meter sockets.
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
For outdoor enclosures with removable closing caps.
|
For outdoor enclosures with removable closing caps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For outdoor enclosures with removable closing caps.
|
For outdoor enclosures with removable closing caps.
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.
|
For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.
|
For use on all Siemens and Murry single position meter sockets.
|
Copper-free aluminum die-cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
For use with MLO and MCB loadcenters and circuit breaker enclosures.
|
For use with MLO and MCB loadcenters and circuit breaker enclosures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For load centers No PL0724R and Challenger No S3100RN, commonly used on WNB breakers.
|
Cutler-Hammer Type A Hub Closure Plate, Aluminum, NEMA 3R Enclosure
|
Cutler-Hammer Type A Hub Closure Plate, 1-1/2 in Nominal, Aluminum, NEMA 3R Enclosure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
Small hub to large opening. Permits installation of group 1 hubs on 200 A type general-duty, heavy-duty and double throw switches. NEMA 3R.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
Indoor or outdoor applications. Use in an overhead service entrance. Cap mounts on top of PVC, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. Bulk packed. PVC Service entrance cap, 2 in.
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
Porcelain and steel. Used to secure the incoming service entrance wires. Mounts below the overhead service entrance cap. Tray boxed.
|
Cutler-Hammer Type A Hub Closure Plate, NEMA 3R Enclosure, Includes: (4) Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
Hubs suitable for 3R switches.
|
For use with MLO and MCB loadcenters and circuit breaker enclosures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper-free aluminum die-cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed.
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
|
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
|
For load centers No PL0724R and Challenger No S3100RN, commonly used on WNB breakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
|
Malleable iron. Use to secure service entrance conduit to the surface of a building. With 10 in bolt, nut and washer. Tray boxed.
|
Malleable iron. Use to secure service entrance conduit to the surface of a building. With 10 in bolt, nut and washer. Tray boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For outdoor enclosures with removable closing caps.
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed. Tray boxed.
|
Carlon Slip Meter Riser, NPS Connection, PVC, Gray, Dimensions: 2.961 in Dia x 24 in L, Suitable for: SCH 40 and 80 Conduits
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carlon Slip Meter Riser, NPT Connection, PVC, Gray, Dimensions: 2.492 in Dia x 24 in L, Suitable for: SCH 40 and 80 Conduits
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
Carlon Slip Meter Riser, NPT Connection, PVC, Gray, Dimensions: 3.616 in Dia x 24 in L, Suitable for: SCH 40 and 80 Conduits
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
Carlon? manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40? and Plus 80? conduits are designed for use aboveground and underground as described in the National Electrical Code.
|
Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.
|
|
|
Visit Us