|
|
|
|
|
|
|
|
|
|
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/16 in Thick
|
Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels
|
Fasade J-Trim, PVC, White, Matte, 18 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade Backsplash Inside Corner Trim, Thermoplastic, Smoked Pewter, 18 in L
|
Fasade J-Trim Backsplash, Thermoplastic, Smoked Pewter, 18 in L
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 3/32 in Thick
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
Midwest Products Basswood Sheet, 36 in L, 4 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
Tuftex Round Closure Strip, 6 ft L, 1 in W, Wood, Brown, Horizontal Mounting, Suitable for: SeaCoaster Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuftex Square Closure Strip, 6 ft L, Wood, Horizontal Mounting, Suitable for: Polycarp Panel
|
Sanded on four sides.
|
MIDWEST PRODUCTS Wood Strip, 1/8 in Nominal Thickness, 1/8 in Width, 24 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Tuftex Round Closure Strip, 3 ft L, Foam, Horizontal Mounting, Suitable for: Tuftex SeaCoaster PVC Panel
|
Tuftex Square Closure Strip, 3 ft L, 1 in W, Polyethylene Foam, Horizontal Mounting, Suitable for: Polycarp Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuftex Round Closure Strip, 8 ft L, Wood, Natural Wood, Horizontal Mounting
|
Tuftex Multi-Wall U-Channel, Trim Type: Corrugated, 8 ft L, 1/2 ft W, Polycarbonate, Clear
|
M-D Moulding Divider, Aluminum, Silver, 1-3/8 in Width, 96 in Depth, Suitable for: 3/8 in Thick Material, Includes: Caps, Edging, Corners, Cove and Dividers
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 11-3/4 in Actual Width
|
Basswood is ideal for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cu-in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms. Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
Cleanly cuts in both directions. Compact size. Provides exacting control for flush trimming wood veneer, melamine, PVC and polyester edgebanding. Measures 3 in x 2-1/4 in x 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 8 ft Length
|
|
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Used to cap off the edges of a lattice panel, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to join lattice panels together, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood. 1-1/8 in W. Accommodates standard Universal Forest lattices.
|
Used to cap off the edges of a lattice panel, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood.
|
Surface mount for light fixture. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. Fits all type of siding. 6-7/10 x 6-7/10 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
M-D Moulding Divider, Aluminum, Silver, 1-3/8 in Width, 96 in Depth, Suitable for: 7/16 in Thick Material, Includes: Caps, Edging, Corners, Cove and Dividers
|
Tuftex Screw, Thread Size: #10, 2 in L, Thread Type: Coarse, Drive Type: Hex, Point Type: Self-Drilling, Steel, Galvanized, Drive Size: 1/4 in, Applicable Materials: Plastic, Vinyl
|
Tuftex Multi-Wall H-Channel, Trim Type: Corrugated, 8 ft L, 1/4 ft W, Polycarbonate, Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
ALEXANDRIA Moulding Rectangular Plywood, 1/4 in Actual Thickness, 2 in Actual Width, 4 ft Actual Length, B-C Grade
|
Used for installing short wire connections and hose bibs. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. ID 3 in x 4-3/4 in. OD 4-1/2 in x 6-5/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Perfect for backsplash, walls and accents; each tile covers 1 square foot; easy peel & stick application.
|
Used to join lattice panels together, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood. 1-1/8 in W. Accommodates standard Universal Forest lattices.
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. 5 x 6 in ID. 7 x 8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 6 in Width, 8 ft Length
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
|
|
|
|
|
|
|
|
|
|
|
|
Rivets can be used in conjunction with adhesive when attaching Palclad panels to a substrate. 50/BG.
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 6 in Width, 2 in Thickness
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
|